A Leading Global Manufacturer Of Recycling Machinery.

Find A Location
Contact Us

Call Us At +918849171589

Address
Ahmedabad, Gujarat(India)

Email Address: info@maskhydraulics.com

Continuous Baler

  • Home
  • Continuous Baler
continuos_baler 1 1

Offering Continuous Metal Scrap Shear Baling Press Machine

A continuous shearing baler press machine is mostly used to compress scrap metal with low weight and high volume, such as waste cans and tins, stainless steel scrap, copper scrap, light metal scrap, waste aluminum profiles, aluminum chips, non-ferrous metal scrap, etc. Our Continuous Metal Scrap Shear Baling Press Machine is primarily used in steel manufacturers and many waste disposal recycling centers. It is composed of three sections: hydraulic system, electrical system, and mainframe, equipped with a large volume hopper to hold more scrap metal, short cycle time for one bale, and high capacity. It can compress many materials such as metal scrap, aluminum scrap, stainless scrap, copper scrap, all types of ferrous and non-ferrous metals, and so on.

Download Catalogue
LOOKING FOR Bailing Machineries Manufacturers, Suppliers

A Technology For Recycle

Contact Us

telephoneCall Now: +91-88491-71589

MASK Hydraulic Machineries logo w

Working Principle of Continuous Metal Scrap Shear Baling Press Machine

The metal scrap is fed into the large volume hopper by a conveyor or grabber, and the side cylinder presses the scrap metal to the side cylinder's limit. Then, the top cylinder presses the material to the top cylinder's limit. Then, the main cylinder begins to press the scrap to the limit of the non-ferrous metal baling press machine, the locking cylinder opens, and the main cylinder pushes the stainless steel bale out. At last, every cylinder returns to its initial position, and the bale cycle is finished.

View All Products
continuos_baler 3
continuos_baler 4

Applications of Continuous Metal Scrap Shear Baling Press Machine

Advantages of Continuous Metal Scrap Shear Baling Press Machine

continuos_baler 2 1
1. Adopts the side continuous push-out type, which allows the bale to be pushed out constantly, resulting in higher efficiency.
2. The advanced shearing and baling system design with a large chamber allows the bale to be finished in one cycle, eliminating the need for further feeding sessions.
3. Simple to operate and maintain, saves stock and labor costs, transportation expenses, and space.
4.Large scrap hopper and chamber size, short cycle time, and higher output capacity of up to 60 bales/hour.
5.Automatic PLC control with remote control that is simple to operate and maintain.
6.The inner wear plate adopts a well-known international brand of NM450 that is both durable and trustworthy, and Hardox450 is optional.
7.The output capacity ranges from 500 to 5000 kg per hour, giving you more possibilities.
8.Adopts German Hydraulic technology to ensure the equipment runs smoothly and effectively.
9.It's an excellent baler machine for your great organization because it's low-cost and cost-effective.

Parameters

Model Box Size Bale Size Bale Weight (KG) Power (HP)
CONTINUOUS 8 68 X 30 X 30 8 X 8 25-30 50
CONTINUOUS 10 70 X 30 X 30 10 X 10 35-40 50
CONTINUOUS 12 72 X 30 X 30 12 X 12 40-50 50
CONTINUOUS 14 74 X 30 X 30 14 X 14 50-60 50

Frequently Asked Questions

What details should I share before ordering a continuous baler for our scrap stream?
The type of light metal you’re processing, UBC cans, copper, aluminium chips, or a mix, along with your expected daily volume. Do also mention whether you’ll be feeding it by conveyor or grabber, since that can shape which model fits your setup best.
Waste cans and tins, stainless steel scrap, copper scrap, aluminium chips, waste aluminium profiles, and general ferrous and non-ferrous metal scrap all go through it. It’s built specifically around low-weight, high-volume material rather than dense, bulky scrap.
Once a bale’s pressed, it gets pushed out the side continuously rather than the machine pausing for a full reset cycle. This is really what keeps efficiency high on a continuous baler, since bales come out one after another without extended downtime between them.
For cleaner, higher-value bales, yes, this is generally worth doing beforehand. Steel contamination in aluminium scrap, for instance, lowers the effective yield buyers are willing to pay for, so a bit of separation upfront tends to pay off once the bales are sold.
Up to 60 bales per hour, with overall throughput ranging from 500 to 5000kg depending on the model and material density. Do share your actual daily tonnage and we’ll confirm which end of that range you’re realistically likely to see.
Constant scrap contact wears down the chamber lining faster than most people expect, so the wear plate needs to hold up. We use a well-known international brand of NM450 as standard, with Hardox450 available as an upgrade for even tougher, more abrasive material streams.
Just one, generally, particularly with a conveyor or grabber handling the feed. Automatic PLC control with remote operation keeps things simple enough that a single operator can manage the whole cycle without needing a larger team standing by.
Reasonably quiet, actually, which matters more than people expect once a machine’s running full shifts near other operations. Low noise operation also makes for a more comfortable working environment for whoever’s stationed near it throughout the day.
CONTINUOUS 10 or CONTINUOUS 12 tend to fit mid-range volumes well, both running at 50 HP with bale weights between 35 and 50kg depending on which one you choose. Share your daily tonnage with us and we’ll confirm the right fit for your operation.
Checking the hydraulic system regularly and lubricating moving parts as needed covers most of it. Do also inspect the wear plate periodically for signs of thinning, since catching wear early is considerably cheaper than dealing with a chamber lining replacement later.
error: Content is protected !!